Tyre Heidenau K65 90/90-19 TL 52H Universal Front or Rear
part-no: HEIDENAU90/90H19
in stock
Tyre Heidenau K65 100/90-19 TL 57H Universal Front or Rear
part-no: HEIDENAU100/90H19
in stock
HEADLAMP UNIT 7" H4 R/H DIP complete with TWO LED BULBS WIPAC MAIN & PILOT for countries riding on right hand side of the road
part-no: 06.8053/LED
in stock
HEADLAMP UNIT 7" H4 L/H DIP WITH TWO LED BULBS WIPAC MAIN & PILOT (54526114) for UK & countries riding on left hand side of the road.
part-no: 06.8052/LED
in stock
Charge warning light (BSM - Battery Status Monitor) extended lead version - 2 metres - Fits all 12V DC pos & neg earth
part-no: 13.1992
in stock
Charge warning light (BSM - battery status monitor) Suitable for all 12V DC vehicles positive or negative earth with a charging system
part-no: 13.1947
in stock
LUCAS LED Stop/Tail Bulb 12V BAY15D fitting suitable for Lucas 917 rear light. For use on Positive or Negative systems.
part-no: 99.0542/LED/917
in stock
Electronic Ignition kit Tri Spark: Regulator/Rectifier complete with capacitor and one 12v dual output ignition coils. Includes mounting bracket.
part-no: 13.1983
in stock
LUCAS LED Headlight Bulb H4 fitting 6-24V. For use on Positive or Negative systems.
part-no: 06.8022/LED
in stock
Electronic Ignition kit Tri Spark: Regulator/Rectifier complete with capacitor and two 6v ignition coils. Includes mounting bracket.
part-no: 13.1972
in stock
INDICATOR KIT Lucas (4 LONG STEM) FOR 1971 and 1972 COMMANDO with Lucas cast switchgear. With instructions
part-no: 06.2329-L
in stock
LUCAS LED Headlight Bulb BPF fitting 6-24V. For use on Positive or Negative systems.
part-no: 06.8019/LED
in stock
LUCAS LED Stop/Tail Bulb 12V BAY15D fitting suitable for Lucas 564, 529 and 679 rear lights.For use on Positive or Negative systems.
part-no: 99.0542/LED
in stock
Clutch plain plate for Commando 750/850 (3mm thick hardened and ground) *Replaces one 2mm thick plate to achieve a lighter clutch lever action*
part-no: 13.1948
in stock
Amal Concentric Premier Carburettor Pack (2 carbs) for Norton Commando 850cc Mk2a 1974 32mm Main jet 260 Throttle valve No.3.1/2 Needle jet 0.106 Pilot jet 19 (PACK 138) includes single inlet fuel pipe banjos and filters
part-no: AMALPACK138
in stock
MAGNETIC DRAIN PLUG SET including WASHERS FOR SUMP, OIL TANK & GEARBOX (COMMANDO 750/850 from 1972 to 1978)
part-no: 13.1883
out of stock
(contact us for an availability quote)
INDICATOR KIT Lucas (2 SHORT & 2 LONG STEM) FOR 1971 and 1972 COMMANDO with Lucas cast switchgear. With instructions
part-no: 06.2329/S
out of stock
(contact us for an availability quote)
STAY UP FLOAT KIT Mk1/Mk2
part-no: AMALRKC/550
in stock
IGNITION COIL 6V Tri Spark (ICG-1006) 1.5/8" (40mm) diameter (99.0576)
part-no: 99.0576
in stock
Amal Concentric Premier Carburettor Pack (2 carbs) for Norton Commando 750cc Combat/late 750cc 1972 -1973 32mm Main jet 230 Throttle valve No.3 Needle jet 0.106 Pilot jet 17 (PACK 112) includes single inlet fuel pipe banjos and filters
part-no: 06.7360
in stock
ISOLASTIC KIT FRONT VERNIER for COMMANDO 750 850 1968 to 1974 *YOUR FRONT ENGINE MOUNT MUST BE UNMODIFIED - CALL IF NOT SURE *
part-no: 06.7337
in stock
Amal Concentric Premier Carburettor Pack (2 carbs) for Norton Commando 850cc Mk2a & Mk3 1974-1975 32mm Main jet 220 Throttle valve No.3.1/2 Needle jet 0.106 Pilot jet 19 (PACK 113) includes double inlet fuel pipe banjos and filters
part-no: 06.7334
in stock
Amal Concentric Premier Carburettor Pack (2 carbs) for Norton Commando 850cc Mk1 Mk2 1973-1974 32mm Main jet 260 Throttle valve No.3.1/2 Needle jet 0.106 Pilot jet 19 (PACK 136) includes single inlet fuel pipe banjos and filters
part-no: 06.7333
in stock
Amal Concentric Premier Carburettor Pack (2 carbs) for Norton Commando 750cc 1968-1972 30mm Main jet 220 Throttle valve No.3 Needle jet 0.106 Pilot jet 17 (PACK 111) includes single inlet fuel pipe banjos and filters
part-no: 06.7332
in stock
TACHO DRIVE HOUSING WITH OIL SEAL (06.1090 & 06.5200)
part-no: 06.7254
in stock
ISOLASTIC KIT REAR VERNIER (for all 750/850 COMMANDOS)
part-no: 06.7117
in stock
ISOLASTIC KIT FRONT VERNIER MK3 ONLY (use 06.7337 Pre Mk3)
part-no: 06.7116
in stock
TWIN LEADING SHOE (TLS) 8 inch FRONT BRAKE PLATE ASSY including SHOES & STIFFENING KIT FOR 8 INCH HUB
part-no: 06.3281
in stock
TWIN LEADING SHOE (TLS) 8 inch FRONT BRAKE PLATE ASSEMBLY complete with FIXED FITTINGS
part-no: 06.3280
in stock
GEARBOX OUTER COVER ASSY
part-no: 06.0740
in stock
MAGNETIC CRANKCASE (SUMP) FILTER KIT Suitable for all Norton 500-850 twins (except some1972/3 models)
part-no: 06.7281
in stock
REAR BRAKE LEVER SAFETY SPRING FOR 1968 to 1974 Commando. Prevents brake lever dropping if rear brake cable breaks.
part-no: 06.4172
in stock
OIL FILTER KIT (WITH PLAIN 3/8" ID HOSE) BARBED PIPES
part-no: 06.4283P
in stock
FRONT DRUM BRAKE STIFFENING KIT for 8 inch twin leading shoe brake
part-no: 06.3410
in stock
Electronic Ignition kit Pazon Surefire (12v) for Norton, Triumph & BSA. This system replaces the points, ballast resistor, condensers and mechanical advance unit.
part-no: 13.1500
in stock
Electronic Ignition kit Tri Spark TRI - 0006 suitable for 750 850 Commando 1968 to 1977, late Atlas. 1968 P11 Ranger and Triumph Unit Twins: T100, T120, TR7RV, and T140 Bonneville
part-no: 06.6982
in stock
RECTIFIER/REGULATOR (SINGLE-PHASE) with capacitor PODTRONICS 200w This part replaces the rectifier, zener diode and capacitor.
part-no: 13.1422
in stock
CAMSHAFT PW3 (DOMMIE/ATLAS/EARLY COMMANDO) WITH LUBE PACK Material: Steel 655M13 (EN36B) Made in England
part-no: 06.7368
in stock
CAMSHAFT PW3 COMMANDO (REV COUNTER DRIVE) WITH LUBE PACK Material: Steel 655M13 (EN36B) Made in England
part-no: 06.7367
in stock
FRONT MASTER CYLINDER ASSY complete and ready to fit with LEVER (Pre850MK3) (13mm bore)
part-no: 06.4871/13
in stock
FRONT MASTER CYLINDER ASSEMBLY complete & ready to fit with LEVER 850mk3 (13mm bore) PAINTED SATIN BLACK