Login
Andover Norton News
06.7325
Motorcycle parts and spares for Norton motorbikes
06.7325
Intermediate Shaft Support Plate Tool

Rather than cutting a timing cover up as suggested in old workshop manuals this tool locates the intermediate spindle so timing chain tension can be pre-set accurately before the timing cover is fitted.

This tool is supplied with spacers and screws to fit both Dominator and Commando engines.
2013
Motorcycle parts and spares for Norton motorbikes.
Our crusade to have all the parts all the time continues.
We were asked by a dealer to have some silencers made in black chrome for a special project. So we did. Unfortunately, black chrome is now no longer available.

Probably for the first time in many (30?) years we have all oil junction block variants in stock, parts:

06.2206
-
06.1345
-
06.0638
-
06.4134
Instrument Mounting Plate, P11

03.3063
Long Roadholder Cover under bottom fork yoke 06.7743
NM16249 Pillion Footrest Rubbers, Dominator/Singles 99.1207/L

Genuine Warning Lights with Bulb Holders & Bulbs:

99.1207/L
-
99.1208/L
-
99.1209/L


March 2013
Retirement of our Managing Director, Nick Hopkins
Typical Picture of Nick at Work.
Nick started with Andover Norton when it was founded in June, 1977, and has worked for the company from Day1. An impressive stretch with the same employer that few, if any of us, can equal.

We wish Nick a happy and healthy retirement and hope we can rely on him and his knowledge, at least part-time, in the future.
Nick says: "After almost 5 decades in the motorcycle industry (I started with BSA in the Service Department at Armoury Road in 1966) I have finally reached the point at which “I want to spend more time with my bikes”. To say that it has been an interesting journey is an understatement, and at times the ride has been a rather bumpy one but while the mainstream motorcycle business is going through difficult times at the moment the classic side of things is keeping us very busy indeed. It is a privilege to have been a part of the scene for so long, and I will miss my daily contact with customers worldwide but I will be thinking of you as I fettle (and maybe even ride?) my Commando and other Nortons."
February 2013
Even during our move new items were added to our growing spares range:
For those who want to get rid on an unsightly Belt Drive- or simply have a worn-out Clutch on their Norton Manx:
Clutch Chainwheel, Manx Norton Type:

04.0359/M
06.4539
Swinging Arms!
Rear Swinging arm, gusseted, for 750/850 Commando

06.4539


Also available ungusseted for earlier Commandos:

06.0441
Andover Norton is now installed in Brunel Gate, Andover, and has started shipping orders out in the last week of January.
Most parts are now back on the shelves, and the backlog of orders we hope to have completed and shipped by mid-February. Working conditions are much improved for all members of the team with more space, more light, and one big, spacious store instead of the two cramped ones we occupied in Hungerford. When we rented the premises in Hungerford in September 2007, the stock was about half what it is now. The Andover Norton team was also smaller.

Our range of Commando and Dominator spares has increased with a lot of parts that the company did not have since original stocks, taken over from Norton Villiers Triumph in 1978, ran out. Some of these newly introduced items can be found further down on this page as well as on the "New Items Just In" Page. In the meantime we acquired J.R.Technical Publications with its range of Triumph/BSA parts lists, riders handbooks, and workshop manuals.

We also took over the Norton Rotary spares stock from our sister company Norton Motors Ltd.
January 2013
Norton Spare Parts News
Andover Norton has moved into the new premises and, snow permitting, starts to ship spares out to the Genuine Norton Factory Spare Parts starved world on Wednesday, 23rd January 2013.
No longer do Norton owners have to make do with inferior pattern parts sometimes bearing copycat trademarks.

Norton owners can now buy the real deal again, Andover Norton's Genuine Norton Factory Spare Parts - made on original tooling, to original drawings, in original materials, finished to the original tolerances by the original methods as laid down in the Norton factory drawings.

Our team has another new member. Simon Amos, who has joined us from Honda UK, to strengthen our purchasing team.
December 2012
Norton Spare Parts News
Before our move back to Andover in January we continue to re-introduce products, that were unavailable for many years:

06.1116 Centre Stand, early (1968-70) Commando.


06.7275 Rear Master Cylinder Pushrod (AP4116-115)
.
November 2012
Levers for early Commandos
We were asked for levers for early Commandos many times in recent years and did not have the perfect answer. But now we have.

These levers have the Correct 7/8” cable barrel/lever pivot distance to keep the clutch action light and have original style clamps that have the screws vertically positioned. They also have the air lever on the brake lever assembly side, and come complete with the improved later style cable adjusters.

06.0690/1
CLUTCH/BRAKE LEVERS PAIR (INCLUDES AIR LEVER)

06.0690
BRAKE LEVER/AIR LEVER ASSEMBLY

06.0691
CLUTCH LEVER
The "S"-Type
Are you one of the many young motorcycle fans who fell for the model on the right when they first saw it? I am talking about the sexy exhaust system that gives the Commando "S" the extra "Je ne sais quoi"- and it will in fact fit any Commando model. The complete system with all brackets, heat shields, special screws etc is now available from Andover Norton
.
We have taken the trouble to buy a Commando as a sample bike to fit our new products to, and that Commando has now served to ensure our "S"-pipes- unlike other systems currently on the market- fit!

For Details of the "S"-Type Exhaust System please click here
New Books
Service Release N3/12

Parts List and Installation Instructions for 750 Racer and Formula Racer

NV1142
Roy Bacon's Restoration Titles, AJS/Matchless, BSA Singles, BSA Twins, Triumph Twins and Norton Twins have now all been reprinted and are now available again from the publishers, Andover Norton International Ltd.
Bronze Guides for Sporty Engines
Andover Norton Bronze Valve Guides for Dominators & Commandos
Our engine tuner Rudi Kolano prefers to use bronze valve guides in aluminium cylinder heads for their better heat transfer capacity as well as their fail-safe virtues in case of lubrication failure. Our race engines, therefore, all run on bronze valve guides, and some of our road bikes, too. Until recently we used the valve guides made by Rowe, the Californian manufacturers. Since Ed Rowe closed his business we researched alternatives, none of which were deemed satisfactory.
We therefore decided to commission bronze valve guide manufacture to works drawings, using the same bronze alloy BMW use for their air-cooled flat twins. Valve guides on the left suit 500cc through 750cc Norton Twins, those on the right the 850s.

Note: Rudi Kolano also insists on using our Genuine Andover Norton valves because, he finds, they are the best quality valves he has encountered, including the black Melonite Rowe valves.
October 2012
Norton Spare Parts News
Another addition to our constantly growing spares range:
Andover Norton has new stock of British-made Commando Roadster side panels, in etch-primed steel ready for painting.

The left-hand panel has the original specification tool pocket inside it and the mounting bracket is pre-fitted with the Dzus fastener clip. The right-hand panel has the spacer mounts inside to correctly align the panel to the oil tank. The etch-primed finish is compatible with all current painting methods, and once painted these panels will give the finishing touch to any Commando Roadster restoration.

06.3503
SIDE COVER L/H (ROADSTER - IN PRIMER)
06.3504
SIDE COVER R/H OIL TANK (ROADSTER - IN PRIMER)
06.3503/4
SIDE COVERS PAIR (ROADSTER - IN PRIMER)

Picture above shows the toolpocket in the left hand panel. We have just been made aware the picture above was stolen by an Indian supplier and shown in his e-bay auction to sell his sorry copies of the above. We see this as a compliment!
Planned for July delivery, and already in stock in October(!): World exlusive.
Only available from us:
Genuine AP Lockheed CP2195 calipers!
CP2195-1002EO caliper for front r.h. or rear l.h. mounting
CP2195-1003EO caliper for front l.h. or rear r.h. mounting
92.2382
REAR CARRIER – COMMANDER

New parts for Norton Rotaries: Since Andover Norton has taken on the Rotary Spares stock of Norton Motors Ltd we have gradually re-stocked normal consumables resp. re-introduced popular items that had not been available since the original stock dried up.
55.1084
/ 92.1832 VOLTAGE REGULATOR
September 2012
At last: Rear mudguards for Fastbacks!
Another long-term project has now been put into production, our Fastback rear mudguards. These are very different to the normal rear mudguards of the other Commando models. Not only are they shorter, but they have a flared edge.

Fitting one of the Roadster/Interstate/"S"/"SS" rear mudguards to a Fastback results in a very odd-looking rear end that simply is not right. And, yes, we have seen it done many times!

We now offer four variants of these mudguards: the early (1968-70) Fastback mudguard with one mounting point at the front (part no. 06-0507, right), and the post-1970 mudguard with two holes at the front - part no.
06.2171
, left.

These come under the original part numbers painted black.

Adding a /1 to the part number - i.e. ordering
06.0507/1
resp.
06.2171/1
- gets you a polished version of the same stainless steel item, and thus a replica of the chromium-plated guards used on the Production Racers.
May 2012
Now available from Andover Norton: Alton Electric Start Conversion
You may think these kits are not available though us if you followed the recent press coverage. The reason is that we insisted on checking the kits first. We have fitted and operated a couple of kits to our satisfaction before we decided to distribute them.
The Alton electric start kit is relatively simple to fit. One advantage is that, should one decide to convert their Commando back to original, this is easily possible. In the meantime the electric start kit makes life with the Commando much easier, especially for those who have knee or hip problems, and now find it hard to kickstart their Commando.
The Starter Kit contains a new alternator and all other parts (except the battery) that is needed to convert the motorcycle. It is suitable for 750 and 850 (pre-Mk3) Commandos with triplex chain (standard production) primary drives. Installation instructions are included in the kit.
April 2012
The Classic Motorcycle features Andover Norton
Well, that was the idea, anyway. Reads more like a CV of its owner- apologies, we'd have liked to read- and see!- more about the company itself.
March 2012
And further to our new headlamps:
We have just taken delivery of
99.1155/1
HEADLAMP SHELL & RIM (3 W/LIGHT+1 SWITCH) 60279 (99.7039)
99.7098
HEADLAMP SHELL & RIM (PLAIN TOP) 850 Mk3 60868A
99.1219
HEADLAMP SHELL & RIM (3 W/LAMP+ 1 SWITCH)
HI-RIDER 6"

Coming soon:
06.7285
HEADLAMP SHELL & RIM (AMM+SWITCH+1xLIGHT) '68-'70 (54523999)
THE EXCLUSIVE SOURCE OF ALL GENUINE NORTON COMMANDO AND NORTON DOMINATOR FACTORY SPARE PARTS

e-mail: office@andover-norton.co.uk | phone: +44 (0) 1264 359 565 | telefax: +44 (0) 1264 748 409 |

Andover Norton International Ltd | Unit 4 Brunel Gate
Portway West Business Park | Andover, Hants. SP10 3SL England

Imprint/Contact | Terms of Use

© 2017 Andover Norton International Ltd.

All financial transactions are securely handled by :
Visit nvt-motorcycles.com for Genuine Triumph Spare Parts