Login
Andover Norton News
Christmas Closure
Thursday 12th December – Open as usual – Last Day Dispatch Rest of the World

Wednesday 18th December – Open as Usual – Last Day Europe Dispatch

Friday 20th December – Open as usual – Last Day UK despatch



Monday 23rd December – Open as usual – Limited Courier Collections

Tuesday 24th December – Open until 2pm – No Courier Collections

Christmas Holidays until

Thursday 2nd January 2020 – Open as usual
December 2019
13.1789
Andover Norton Calendar for 2020
13.1789
Now available at last: The 2020 Andover Norton Calendar.
Your companion for an enjoyable new season on your Norton!
03.3124
13.1801
TX0160C
03.3124
REAR WHEEL SPINDLE, P11/P11A
13.1801
TRI SPARK MOSFET RECTIFIER SINGLE & 3 PHASE 20 AMP WITH CAPACITOR
TX0160C
Made by hand to replicate exactly the very special mudguard of the 105 genuine Norvil Production Racers (beware of imitations!) manufactured in North Way/Andover and Thruxton in the early 1970s. This part took three years to make from the "go" for the project until we laid hands on the finished item!
November 2019
06.8044
N4C
N5C
06.8044
FUSEHOLDER (FOR GLASS FUSE) C/W WIRES (54938986)
N4C
Spark Plug Champion N4C, suits most Dominators, Model 50 & ES2
N5C
Spark Plug N5C, suits Big4, 16H, Model 19, Model 77 & 88.
October 2019
The Move, 14th to 19th October. "The best laid plans" etc.
Our MD Karl had hoped to get the whole move done within a week and planned it all thoroughly and well. What we did not realize was how much stock was squeezed into our old stores in Brunel Gate over the years. The flood of goods seemed neverending. I now know what our stock figure is based on- and that after writing a lot off! After a full week of hard and constant work by the whole Andover Norton Team plus hired help we have now emptied the shelves in Brunel Gate. We haven't even started on our #2 works, where tooling, surplus and half-finished goods are stored and will probably not start on that before the new year!
We did get the first orders out on Tuesday, 22nd October.
September 2019
06.1978/X/L
NM19629/1
NM20344
06.1978/X/L
SILENCER; SEAMED, C/W SOUND DEADENING & NORTON LOGO, PAIR
NM19619/1
BREATHER PIPE, CRANKCASE, 1/2" x 5/16" x 7 1/2"
NM20344
STUD, CARB TO MANIFOLD
August 2019
06.1665
06.1928
13.1785
06.1665
BATTERY STRAP MATERIAL PER METRE, 25MM WIDE, 2MM THICK
06.1928
HELICOIL FOR CALIPER MOUNTING
13.1785
ROADSTER EXHAUST SYSTEM CTE, COMMANDO 750
NM19629
NM20126
02.9261
NM19629
BREATHER PIPE 1/2" x 5/16" x 26 1/8"
NM20126
COVER, FEATHERBED FRAME GUSSET PLATE
02.9261
FRONT WHEEL SPINDLE, P11/P11A & AMC
06.1978/X/SNL
13.1782
13.1786
06.1978/X/SNL
SILENCER, SEAMLESS WITH SOUND SUPPRESSION, NO LOGO, PAIR
13.1781
PISTON RING CLAMP, 71mm to 75mm (2.76" to 2.96")
13.1782
PISTON RING CLAMP, 75mm to 80mm (2.96" to 3.15")
13.1786
SKID PLATE KIT, COMMANDO (ALL MODELS)
JUNE 2019
06.1089/S
06.1918
13.1784
06.1089/S
REV COUNTER DRIVE GEAR, SCROLLED (06.5201)
06.1918
STEERING STEM (SUB ASSY. ONLY)
13.1784
COMMANDO "S"-TYPE EXHAUST SYSTEM COMPLETE
May 2019
NM19376
NM18095/LINK
13.1780
NM19376
Seat for Norton Manx
NM18095/LINK
REAR CHAIN LINK, 5/8" x 1/4" (520) IWIS
13.1780
HEX. KEY FOR ROCKER ADJUSTMENT
06.2481
06.4644
A2/368
06.2481
CLUTCH ASSEMBLY, COMMANDO, FIBRE PLATES
06.4644
CLUTCH ASSEMBLY, COMMANDO, SINTER PLATES
A2/368
GEARBOX SPROCKET, 19T, DOLLS HEAD
13.1775
13.1776
13.1777
13.1775
MOUNTING KIT FOR FIBREGLASS FUEL TANK (ROADSTER/FASTBACK)
13.1776
MOUNTING KIT FOR STEEL ROADSTER FUEL TANK
13.1777
MOUNTING KIT FOR STEEL ROADSTER FUEL TANK (850Mk3)
April 2019
06.1978/X
06.1978/X

The Roadster/"Peashooter" Silencer to Drawing!
It may seem hard to believe but this is a project which cost us over two years and gave us no end of frustrations!
None of the Roadster silencers we have encountered in the market for many years was to the drawing's spec, i.e. none had the "fluted" tube inside plus the packing that gives that pleasant, deep note and is nicely subdued at the lower end of the rev range.
We can now, at long last, offer the correct specification silencers
06.1978/X
.
06.0504
06.4066
06.7790
06.0504
RUBBER PAD FOR TAIL CLIP
06.4066
DZUS RECEPTABLE
06.7790
SEAT PEG RUBBER, FRONT, FEATHERBED
13.1769
13.1771
13.1772
13.1769
IGNITION TIMING PLATE CHECK TOOL
13.1771
PUNCH FOR ROLL PIN, FILLER CAP
13.1772
PUNCH FOR ROLL PIN, SEAT KNOB
March 2019
06.2700
13.1768
NM25462
06.2700
CARB INTAKE INSULATOR 32mm 1/8" THICK (COMBAT)
13.1768
CONVERSION SET FOR 1968-70 COMMANDO. TO FIT 06.7604 BEARINGS THAT ARE MAINTENANCE-FREE TO EARLY COMMANDO FRAMES.
06.7742/S
BEARING SPACER TUBE ONLY,
NM25462
SLIMLINE TOOL TRAY
06.0502
06.3512
06.3498
06.0502
1968 FASTBACK TAIL PIECE (REQUIRES PAINTING)
06.3512
SPACER, BEHIND FOOTREST PLATES, ANDOVER NORVIL
06.3498
PIVOT LUG, RIGHT HAND, ANDOVER NORVIL
06.3495
06.3500
13.1766
06.3495
FOOTPEG, PRODDY RACER (ANDOVER NORVIL)
06.3500
FOOTPEG INSERT LH & RH, ANDOVER NORVIL
13.1766
PETROL TANK MOUNTING KIT, P11/P11A/N15CS/G15CS/G15CSR
February 2019
03.3083
03.3090
06.2465
03.3083
DISTANCE PIECE, REAR WHEEL SPINDLE, P11/P11A
03.3090
SPINDLE NUT SPACER, P11/P11A
06.2465
BOLT 5/16" UNC x 1 1/4" ZINC PLATED
02.8071
03.3031
13.1767
02.8071
OUTER REAR HUB COVER SPACER, P11/P11A & AMC
03.3031
INNER SPACER, REAR HUB COVER PLATE, P11/P11A & AMC
13.1767
SPOKE & NIPPLE SET FOR 19" FULL HUB WHEEL, POLISHED STAINLESS
01.6845
02.1693/S
06.0847
01.6845
LOCKNUT, 3/8" BSF, ALL METAL, ZINC PLATED
02.1693/S
SPOKE NIPPLE, 10SWG, POLISHED STAINLESS
06.0847
ROTOLOCK FASTENER STUD
06.2525/S
06.2526/S
14.0119
06.2525/S
INNER SPOKES (PER 10), POLISHED STAINLESS STEEL
06.2526/S
OUTER SPOKES (PER 10), POLISHED STAINLESS STEEL
14.0119
HEX. SCREW, 5/16" UNF x 2", ZINC PLATED
January 2019
THE EXCLUSIVE SOURCE OF ALL GENUINE NORTON COMMANDO AND NORTON DOMINATOR FACTORY SPARE PARTS
THE EXCLUSIVE SOURCE OF ALL GENUINE NORTON COMMANDO AND NORTON DOMINATOR FACTORY SPARE PARTS

phone: +44 (0) 1264 359 565 | telefax: +44 (0) 1264 748 409 |

Web shop order questions or Retail sales, Trade Sales, Delivery queries:
sales03@andover-norton.co.uk
sales02@andover-norton.co.uk

Technical advice, parts queries:
simon.amos@andover-norton.co.uk
ashley.cutler@andover-norton.co.uk

Andover Norton International Ltd | Unit 6 Wooler Park
North Way | ANDOVER SP10 5AZ England

Imprint/Contact | Data Privacy | Terms of Use | Return Policy

© 2019 Andover Norton International Ltd.

Our sister company in Germany, Norton Motors GmbH, has a large supply of Triumph spares.
Follow link below to access the site and place orders.
This link is provided as a shortcut to the Norton Motors GmbH website.
IMPORTANT: Triumph spares cannot be ordered and shipped with any orders placed with Andover Norton, or payments made to Andover Norton.

Visit nvt-motorcycles.com for Genuine Triumph Spare Parts