GEARBOX WORKSTAND (ALL AMC 'BOXES)
part-no: 13.1654in stock
CLUTCH LOCK TOOL (DOMINATOR & ATLAS)
part-no: 06.7227in stock
CLUTCH EXTRACTOR (DOMINATOR & AMC) CBT/11 - 04.0449
part-no: 03.0449in stock
LOCK WASHER
part-no: 06.0949in stock
CLUTCH COMPRESSOR TOOL C 4805
part-no: 06.0999in stock
CLUTCH LOCKING TOOL, COMMANDO
part-no: 06.1015in stock
GUIDE TOOL - CAMSHAFT OIL SEAL
part-no: 06.1359in stock
PEG SPANNER WITH INSTRUCTIONS (06.1007)
part-no: 06.3965out of stock
(contact us for an availability quote)
"C" SPANNER - EX. LOCKRING (A3/579, SHU/29, 06.1229)
part-no: 06.3968in stock
ISOLASTIC ASSEMBLY TOOL
part-no: 06.3971in stock
OIL SEAL DRIFT SET
part-no: 06.4292in stock
SLIDE HAMMER (06.4615)
part-no: 06.4298in stock
EXTRACTOR ASSY, COMMANDO (061037) (06.0941)
part-no: 06.4297in stock
TOOL FOR INSPECTION CAPS & TRIUMPH OiF OIL TANK CAP
part-no: 06.7245in stock
BOX SPANNER 1/4 x 3/16" WHIT (CYLINDER HEAD)
part-no: 06.7624.1/4in stock
ROCKER SHAFT EXTRACTOR
part-no: 06.1028in stock
GEARBOX LOCKRING ASSY. TOOL (01.5800)
part-no: NM23441in stock
INTERMEDIATE SHAFT SUPPORT PLATE TOOL
part-no: 06.7325in stock
BOX SPANNER 1.1/2 X 1.5/16" (1972-1978 SUMP PLUG)
part-no: 06.7624Cin stock
OIL PRIMING TOOL
part-no: 13.1622in stock
BOX SPANNER 3/4" x 7/8" W (G-BOX/FORK TOP & TO 1971 SUMP) (NM12093)
part-no: 06.7624in stock
TIMING PINION EXTRACTOR (NMET2003)
part-no: 06.7524in stock
ENGINE STAND (FOR ALL 500 TO 850 TWINS)
part-no: 06.7335in stock
ENGINE REPLACEMENT JIG
part-no: 06.7330in stock
TOOL ROLL COMMANDO (COMPLETE) (12.1012, 06.2097)
part-no: 06.7268in stock
FRONT FORK TOP BOLT TOOL (COMMANDO)
part-no: 13.1711in stock
IGNITION TIMING TOOL (850 Mk3)
part-no: 06.6473in stock
COMBINATION SPANNER, 1/4" WW (OBSTRUCTION)
part-no: 13.1660in stock
FUEL TANK DRAIN HOSE
part-no: 13.1687in stock
FUEL LEVEL CHECKING KIT, AMAL MK1
part-no: 13.1688in stock
MAINSHAFT HOLDING TOOL (AMC GEARBOX)
part-no: 13.1710in stock
PISTON RING CLAMP, 65 to 70mm (2.36" to 2.76")
part-no: 13.1846in stock
OIL FILTER TOOL
part-no: 13.1837in stock
PUNCH FOR ROLL PIN, SEAT KNOB
part-no: 13.1772in stock
CLUTCH CABLE ALIGNMENT KIT (COMMANDO)
part-no: 13.1835in stock
REAR FORK PIVOT SLAVE SPINDLE, P41 TO P53
part-no: 92.0572in stock
CALIPER SERVICE TOOL, ROTARY
part-no: 92.0589in stock
CHAIN BREAKER TOOL
part-no: 13.1825in stock
CLUTCH NUT ADJUSTER TOOL (NOT COMMANDO)
part-no: 13.1765in stock
CRIMPING TOOL FOR FUEL PIPE FERRULE
part-no: 13.1821in stock
SPRING COMPRESSOR FOR GIRLING & ANIL SHROUDED SHOCKS
part-no: 13.1806in stock
FORK TOOL
part-no: 61.3824in stock
PISTON RING CLAMP, 75mm to 80mm (2.96" to 3.15") (61.6135)
part-no: 13.1782in stock
PISTON RING CLAMP, 71mm to 75mm (2.76" to 2.96")
part-no: 13.1781in stock
HEX. KEY FOR ROCKER ADJUSTMENT
part-no: 13.1780in stock
IGNITION TIMING PLATE CHECK TOOL c/w instructions
part-no: 13.1769in stock
PUNCH FOR ROLL PIN, FILLER CAP
part-no: 13.1771in stock
AMAL Mk1 CARBURETTOR DRAINPLUG TOOL
part-no: 13.1749in stock
FRONT FORK TOP BOLT TOOL (PRE-COMMANDO)
part-no: 13.1716in stock
HEAD STEADY FIXING TOOL (1973/74 COMMANDO)
part-no: 13.1755in stock
HEX KEY FOR VERNIER ISOLASTIC STOPPER
part-no: 13.1748in stock
SUMP PLUG SPANNER, ALL TWINS WITH LARGE FILTER PLUG
part-no: 13.1733in stock
GREASE GUN, PUSH TYPE
part-no: 13.1742in stock
SPANNER - STEERING HEAD ADJUSTMENT, Commando 1968-70
part-no: 06.0942in stock
SPANNER, STEERING HEAD ADJUSTMENT, PRE-COMMANDO
part-no: 13.1734in stock
TIMING DISC
part-no: 13.1735in stock
COMBINATION SPANNER 2BA
part-no: KD.CSO2BAin stock
ENGINE LOCK TOOL, COMMANDO
part-no: 13.1724in stock
ROCKER SPINDLE TOOL
part-no: 13.1715in stock
CLUTCH COMPRESSION TOOL (ROTARY)
part-no: 69.0614in stock
EXTRACTOR TOOL (50.0408)
part-no: 50.0797out of stock
(contact us for an availability quote)
HEXAGON KEY FOR PART 06.3085
part-no: 13.1714in stock
INNER PRIMARY CHAINCASE FITTING TOOL (ALL COMMANDOS TO
part-no: 13.1708in stock
