SPARE PULLER LEG for TIMING PINION EXTRACTOR (NMET 2003) This part may require grinding for a precise fit.

in stock

Tool Kit 1: Special tools for Norton Commando 750/850 CYLINDER HEAD REMOVAL

in stock

Tool Kit 2: Special tools for Norton Commando 750/850 MAINTAIN/SERVICE

in stock

Tool Kit 3: A comprehensive kit of general tools for Norton Commando 750/850. AF/Whitworth IMPERIAL SOCKETS 3/8" drive & COMBINATION SPANNERS (38 pieces)

in stock

Oil tank drain tool Commando 750/850 (1971 to 1978)

in stock

OPEN-END SPANNER 7/16" x 1/2" AF

in stock

Piston push back tool for disc brake caliper (Commando 750/850)

in stock

Fixing kit for crankshaft ignition timing disc (Atlas, Mercury, 650ss, Dominator)

in stock

Fixing kit for crankshaft ignition timing disc (Commando 750/850)

in stock

3/8" WHITWORTH SOCKET (3/8" DRIVE)

in stock

Open ended spanner A/F 11/16" x 3/4" Chrome Vanadium

in stock

Imperial A/F Socket Set 3/8" drive (11 sizes) 12-point; 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16"

in stock

Whitworth Socket Set 3/8" drive (7 sizes) 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2"

in stock

COMBINATION SPANNER 1/4" WHITWORTH

in stock

Whitworth Combination Spanner Set 8 sizes 1/8in- 9/16"

in stock

Imperial A/F Combination Spanner Set 11 sizes 1/4 inch - 1 inch

in stock

Open ended spanner A/F 5/16" x 3/8" Chrome Vanadium

in stock

REAR SUSPENSION UNIT ADJUSTER SPANNER (FOR GIRLING & ANDOVER NORTON UNITS)

in stock

Hex Socket 1/4" Whitworth 3/8" Drive 12-Point socket for cylinder head bolts

in stock

Open ended spanner Whitworth 5/16" x 3/8" Chrome Vanadium

in stock

Wheel spoke spanner (six sizes) black finish

in stock

MAIN JET KEY FOR AMAL CARBURETTORS

in stock

Spark plug tap M14 x 1.25 Pitch Carbon Steel taper

in stock

Top Dead Centre (TDC) Timing Tool to suit 14mm spark plug thread.

out of stock

Control cable roadside repair kit

in stock

Valve grinding paste dual pack (coarse/ fine, 100gm)

in stock

Valve grinding tool suction double ended

in stock

FITTING TOOL for GEARBOX MAINSHAFT CIRCLIP behind clutch (all COMMANDOS)

in stock

FEELER GAUGE 32 BLADE IMPERIAL/METRIC

in stock

BRAKE CALIPER PRESSURE BLEED KIT for COMMANDO 850Mk3 1975 to 1978

in stock

BRAKE CALIPER PRESSURE BLEED KIT for COMMANDO 1972 to 1974

in stock

PISTON RING CLAMP 65 TO 70MM (2.36" to 2.76") 61.3682

in stock

OIL FILTER REMOVAL TOOL use on your car as well!

in stock

CLUTCH CABLE ALIGNMENT TOOL KIT (COMMANDO) use at gearbox inner cover. Correct alignment improves lever pull effort.

in stock

DRIVE CHAIN BREAKER TOOL

in stock

CLUTCH SPRING NUT ADJUSTER TOOL (PRE-COMMANDO)

in stock

CRIMP TOOL FOR FUEL HOSE PIPE FERRULES

in stock

SPRING COMPRESSOR TOOL FOR GIRLING & ANDOVER NORTON SHROUDED SUSPENSION UNITS. (Ring that fits to shock is OD 72mm/ID 52mm dia.)

in stock

FORK STANCHION FITTING TOOL for Roadholder forks: Norton Commando, Atlas, 650ss, Dominator P11, N15, G15.

in stock

PISTON RING CLAMP 70 TO 75MM (2.76 TO 2.96") 61.3262

in stock

HEX (ALLEN) KEY FOR ENGINE VALVE ROCKER ADJUSTMENT (for use with adjusters 06.7546AK and 06.7546M)

in stock

IGNITION TIMING PLATE CHECK TOOL (COMMANDO 1969 TO 1974)

in stock

PIN PUNCH FOR SEAT KNOB ROLL PIN (COMMANDO)

in stock

PIN PUNCH FOR FILLER CAP ROLL PIN (COMMANDO)

in stock

DRAIN PLUG TOOL for AMAL MK1 CARBURETTORS (USE WITH METAL DRAIN PLUGS ONLY)

in stock

ENGINE HEAD STEADY FIXING TOOL COMMANDO 1973 & 1974

in stock

HEX KEY FOR VERNIER ISOLASTIC ADJUSTMENT

in stock

SUMP SPANNER (500-850 TWINS FOR LARGE FILTER/DRAIN PLUG)

in stock

GREASE GUN (PUSH TYPE) 4 OZ

in stock

SPANNER - STEERING HEAD ADJUSTMENT (PRE- COMMANDO)

in stock

IGNITION TIMING DISC

in stock

ENGINE LOCK TOOL KIT (ALL COMMANDOS) aids removal of the crankshaft & camshaft nuts

in stock

VALVE ROCKER SPINDLE SETTING TOOL (all 500 to 850 twins) to adjust spindle alignment

in stock

FRONT FORK TOP BOLT TOOL (PRE- COMMANDO)

in stock

HEX (ALLEN) KEY FOR CYLINDER BARREL BOLT 06.3085 (COMMANDO)

in stock

FRONT FORK TOP BOLT & STEERING STEM NUT TOOL (COMMANDO 750 850)

in stock

INNER PRIMARY CHAINCASE FITTING TOOL (ALL COMMANDOS 1968 to1974)

in stock

MAINSHAFT HOLDING TOOL (AMC GEARBOX)

in stock

FUEL LEVEL CHECKING KIT FOR AMAL Mk1 CARBURETTORS

in stock

FUEL TANK DRAIN HOSE

in stock

GEARBOX WORKSTAND (ALL AMC BOXES) Securely holds the gearbox during assembly or disassembly.

in stock

ROCKER SHAFT EXTRACTOR TOOL (NORTON TWINS 500-850)

in stock

COMBINATION SPANNER 1/4" WHITWORTH (OBSTRUCTION) for upward facing cylinder head nuts, particularly the one behind the engine. Exclusive to Andover Norton.

in stock

BOX SPANNER 5/8" x 3/4" A.F

in stock

GEARBOX LOCKRING ASSEMBLY TOOL (01.5800) behind gearbox outer cover

in stock

RING SPANNER SET (4 PCS) WHITWORTH

in stock

RING SPANNER SET (4 PCS) A/F

in stock

OPEN-END SPANNER SET (4 PCS) AF

in stock

OIL PRIMING TOOL for 500 600 650 750 & 850 twin engines

in stock

BOX SPANNER 1.1/2 X 1.5/16" (1972-1978 SUMP PLUG)

in stock

BOX SPANNER 1/4 x 3/16" WHIT (CYLINDER HEAD)

in stock

BOX SPANNER 3/4" x 7/8" W (G-BOX/FORK TOP & TO 1971 SUMP)

in stock

TIMING PINION EXTRACTOR (NMET 2003) for Norton 500 600 650 750 & 850 Twins (61.6019) This part is modified by Andover Norton to ensure correct fit

in stock

ENGINE WORKSTAND (ALL 500 to 850 TWIN ENGINES) Securely holds the engine during assembly or disassembly.

in stock

ENGINE REPLACEMENT JIG (COMMANDO) enables the motorcycle to remain rigid and/or be moved with the engine removed.

in stock

INTERMEDIATE SHAFT SUPPORT PLATE TOOL (an essential tool when removing/fitting the camshaft nut)

in stock

TOOL FOR PRIMARY CHAINCASE INSPECTION CAPS (COMMANDO) Close fit avoids slot damage.

in stock

CLUTCH LOCK TOOL/ RUBBER COMPRESSOR (DOMINATOR & ATLAS)

in stock

IGNITION TIMING TOOL (850 Mk3)

in stock

SLIDE HAMMER (06.4615) for valve rocker spindle & contact breaker trigger plate removal

in stock

EXTRACTOR ASSEMBLY FOR ENGINE & CAM SPROCKETS & CLUTCH CENTRE HUB (061037) (06.0941)

in stock

OIL SEAL DRIFT SET COMMANDO (USE WITH CONTACT BREAKER SEAL 06.3609 & CRANKSHAFT SEAL 04.8023)

in stock

"C" SPANNER & VALVE ADJUSTER TOOL (02.3284)(06.1284)

in stock

ISOLASTIC ASSEMBLY TOOL (COMMANDO)

in stock

'C' SPANNER for EXHAUST LOCKRINGS (A3/579) (SHU/29)

in stock

PEG SPANNER for brake caliper and wheel lockring with instructions

in stock

GUIDE TOOL TO PROTECT CAMSHAFT OIL SEAL COMMANDO

in stock

CLUTCH LOCKING TOOL (ALL COMMANDOS)

in stock

CLUTCH SPRING COMPRESSOR TOOL C 4805 (COMMANDO)

in stock

LOCK WASHER

in stock

SPANNER - STEERING HEAD ADJUSTMENT (1968-70 COMMANDO)

in stock

EXTRACTOR TOOL for AUTO ADVANCE UNIT (COMMANDO)

in stock

CLUTCH EXTRACTOR (DOMINATOR & AMC) CBT/11 - 04.0449

out of stock

SPANNER - SPARK PLUG complete with TOMMY BAR

in stock

SWINGING ARM SPINDLE EXTRACTOR BOLT KIT (COMMANDO 750/850)

in stock

TOOL ROLL: A selection of general tools with logo carry bag

in stock

TOOL ROLL with logo (WITHOUT TOOLS)

in stock

BOX SPANNER 7/8" x 15/16" A.F

in stock